50' Copper Immersion Chiller with Leak Proof Fittings, 3/8" OD

(12 reviews) Write a Review
50' Copper Immersion Chiller with Leak Proof Fittings | BREW International

50 ft. of 3/8” OD copper, garden hose fittings soldered on both in and out of the coil.  This prevents the fittings from ever leaking. This coil is heavy duty and sized to chill even a full 10 gallon boil in a matter of minutes. Approximately 10" in diameter, 13.5" tall at the top coil, 23" to the bend in the coil.

Soldered fittings will never leak.  Compression fittings found on other styles of immersion coils tend to expand and contract with the drastic temperature fluctuations during the boiling and cooling processes.  This expansion and contraction will loosen the compression fittings and cause you to leak unsanitized cooling water into your hot wort.  You just worked hard to make your wort, you don't want to contaminate because of a loose fitting.  The soldered fittings are solid and secure. 

The copper loops on this chiller are also easy to adjust to just about any width you desire between the loops.  Simply pull them apart to spread them out!

This product is manufactured using parts made in the USA!

12 Reviews Hide Reviews Show Reviews

  • 5
    Best chiller for the money.

    Posted by David Janiszewski on 21st Jun 2016

    I can't build a 50' chiller from copper for this price. No leaks, 15 gallons down to 80° in 20 minutes with my chugger pump whirlpooling.

  • 5
    Good purchase

    Posted by Unknown on 27th Apr 2016

    I've used this IC twice and both times went from boiling to 70* in 15 minutes. I'm happy with that. It's all that was said to be.

  • 4
    50 chiller

    Posted by Unknown on 5th Mar 2016

    This is my first 50 foot chiller so I kicked it off with a 10 gallon batch. It cooled very quickly with my low ground water temp, about 15 minutes to pitching temp. The chiller serves it's purpose well but you have to be careful how you handle it since it is not wired together to make it rigid. If not careful one could bend and kink the pipe. All in all, it is a great value since it's price was $4 lower than I could get the same length of copper tubing for from Home Depot.

  • 4
    Great Chiller

    Posted by Matt on 5th Nov 2015

    This is a good product with a great price. The only thing I had to do is place an O-ring on the inlet in order to ensure my connection didn't leak. Easy .50 cent fix. Other than that, this product is an excellent value.

  • 4

    Posted by Unknown on 27th Oct 2015

    Purchased the 50' copper wort chiller, item works perfect and does not leak

  • 4

    Posted by cl on 12th Aug 2015

    The thing works good. It's made well enough and cheaper than most in it's peer group.

  • 4
    Great item

    Posted by Mark on 5th Aug 2015

    The 50' copper immersion chiller appears to be well constructed and should serve its purpose well.

  • 4
    Happy with product.

    Posted by Unknown on 9th May 2015

    Works great!

  • 5
    Best Value

    Posted by Unknown on 28th Apr 2015

    This is the best value on the entire internet for a 50' immersion chiller. Seriously, I've looked everywhere. You won't find one cheaper for 50' with soldered fittings!